Skip to content

Recommendations for Compliance with OSHA 1910.132 FRC Flash Fire Memo

OSHA 1910.132

This is the first post of a four-part series where we will cover recommendations for compliance with OSHA 1910.132 FRC Flash Fire Memo. 

The following information is intended to provide insight into compliance with the March 19, 2010 Enforcement Policy Letter issued by OSHA for compliance with OSHA 1910.132 as it relates to protection against flash fire.

The OSHA Enforcement Policy Letter was “intended to clarify OSHA’s policy for citing the general industry standard for personal protective equipment (PPE), for the failure to provide and use flame resistant clothing (FRC) in oil and gas well drilling, servicing, and production-related operations. (1)”

It should be noted that the language used in the March 19, 2010 letter referring to NFPA 2112 is suggestive (i.e. “Employers may consult consensus standards such as NFPA 2112 and 2113 to comply.”). It is unclear at this point whether OSHA will require complete NFPA 2112 compliance.

The primary issue an employer should understand is that they are responsible for: 

  • conducting a hazard assessment;
  • researching the difference in garments; and for
  • being able to explain why a particular garment was chosen.

Generally, flame-resistant clothing is defined in the United States as clothing made from fabrics that self-extinguish once the source of ignition is removed. The specific definition varies among industries. The most widely-accepted test method for industrial work wear is ASTM D6413, Standard Test Method for Flame Resistance of Textiles (Vertical Test). The most common threshold of performance in this test requires less than 2 second after-flame and less than a specified char length. The specified char length is typically either 4” or 6” and varies by standard. A lesser char length does not necessarily indicate better protection, although there may be a positive correlation between the two.

Three possible thresholds of garment specifications that would meet the OSHA 1910.132 standard requirements are listed here in descending order of rigor:

  1. Garments that meet the requirements of NFPA 2112.
  2. Garments made from materials that have been flash fire tested, but do not fully meet the requirements of NFPA 2112.
  3. Garments that meet the ASTM D6413 requirement, but have not been flash fire tested. This would include garments that meet NFPA 70E, ASTM F1506, or can otherwise be demonstrated to exhibit less than 2 second after-flame and less than 6” or 4” char length in ASTM D6413.

Links to the rest of this blog series:

Part 1: NFPA 2112 and Compliance with OSHA 1910.132 FRC Flash Fire Memo

Part 2: Flash Fire Rated Garments Complying with OSHA 1910.132 FRC Flash Fire Memo

Part 3: The OSHA 1910.132 FRC Flash Fire Memo: FR Fabrics Not Flash Fire Tested

This post references the OSHA memo dated March 19, 2010:

No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: